L*W*H
Standard bucket capacity
Digging force
Drawbar pull
Rated load capacity
Operating weight
L*W*H: 7200（7450）X2500X3180 mm
Standard bucket capacity: 1.7 m3
Digging force: 105（95）±3 KN
Drawbar pull: 97±3 KN
Rated load capacity: 3000 kg
Operating weight: 10300(10500)±300 kg
Load level: Large wheeled loader
Dumping type: Standard/High dump
Height(during bucket at the maximum lift position): 4474/4766 mm
Height of the lower pin of the boom from the ground: 3710/4064 mm
Dump height-45°dump angle: 2905/3250 mm
Dump reach-45°dump angle: 1095/1002 mm
Bukcet angle-trasport position: 46.3/46.6 °
Bukcet angle-off-ground position: 40/40.9 °
Digging depth: 30-40/30-40 mm
Bucket angle-Max.lift position: 50.7/47 °
Bucket dump height: 46.6/45 °
Transport height: 400/400 mm
Min.ground clearance: 345/345 mm
Front axle-hinge dimension of front and rear vehicle frame: 1425/1425 mm
Wheel base: 2850/2850 mm
Overall length: 7200/7450 mm
Max.gradeability: 27/27 °
Overall height: 3180/3180 mm
Overall width-Bukcet: 2500/2500 mm
Min.turning radius-Bukcet: 6190/6280 mm
Min.turning radius-Outside of tyre: 5675/5675 mm
Steering angle(R/L): 35/35 °
Wheel thread: 1850/1850 mm
Distance of tyre outside: 2320/2320 mm
Emission standard: China Ⅱ
Rated power/speed: 92/2200 KW/rpm
Max.torque/speed: 500/1400-1600 N.m/rpm
Number of cylinders/Displacement: 6/6.75 L
Generator: 70 Amp
Battery: 2-24V/105Ah Ah
Starting motor: 24V/6kw V
Gearbox form: Fixed shaft power gear shift gearbox
Gear shift form: Flexible shaft control gear shift
Torque convertor form: Single level,Single turbin，Three elements
Drive axle: 24V/6kw V
Starting motor: Fixed front axle&Swing rear axle
Rear axle Swing angle: ±10°
Main reduction: Sprial bevel gear,One-level reduction
Hub reduction: Planetary transmission reduction
Tyre specification: 17.5–25 L-3 12PR TT
Travel speed-forwards: 7/12/24/36
Hub reduction: Planetary transmission reduction
Travel speed-backwards: 8.5/28
Travel brake: Single pipe line clamp disc four wheel dry type
Air pressure: 0.7-0.78MPa
Parking brake: Flexible clamp disc brake
Emergency brake: Flexible clamp disc brake
Form: Full hydraulic load sensor steering
Gear pump: 246L/min.2200prm
System pressure: 14 Mpa
Steering cylinder form: Two-cylinder drive
Steering angle: ±35°
Form: Mechanical flexible shsaft control
Flow: 246L/min.2200prm
Distribution valve: 2-linkage valve
System pressure: 16 Mpa
Sum of the three items: 10.5 s
Fuel: 200 L
Hydraulic oil: 165/170 L
Engine oil: 14 L
Gearbox oil: 36 L
Front bridge/Rear bridge: 18.5/18.5 L
China Ⅱ
Lonking gearbox
Flexible shaft control gear shift
Longking dry-type drive axle
Mechanical flexible shaft operation control
Flexible clamp disc brake
ROPS&FOPS
Detachable cab
Combination instrument
Fan heater
China Ⅲ
Cold start
Pilot operation control
High-dump boom
Oil-bath air filter
Radial tyre
Alarm light
The third linkage piping
Slide window of cab
Reverse image
Cold&Warm aircon
Radio/MP3
Log grapple fork（Single upper,double lower）
Log grapple fork（double upper and lower）
Grass grapple fork
Goods fork
Electric-heating rear window
Lockable oil tank cap
Bucket（2.0m³）
Enlarged bucketEnlarged bucket（2.3m³）
Coal bucket（2.5m³）
Bucket（With 3 service blades）
Side-dumping bucket
Quick-hitch device
Quick-hitch bucket（1.7m³）
Quick-hitch snow removal bucket
Normal detachable cab
– Strong power, high reliability, low noise, energy saving, and environmental protection.
– Independent research and development of arc lifting mechanism, simple structure, strong bearing capacity, good reliability
– IS0 pilot operating mode with easy operation, flexible control and good inching performance.
– International universal quick-change device with easy switching of cleaning, miling, snow-blowing, and other accessories.
– Standard bucket floating and automatic leveling function that greatly improves the work efficiency.
– All-around maintenance space that ensures easy access to the parts to be maintained and facilitates maintenance.
