L*W*H
Standard bucket capacity
Digging force
Drawbar pull
Rated load capacity
Operating weight
L*W*H: 8105(8230)×3000×3380 mm
Standard bucket capacity: 3 m3
Digging force: 170±3 KN
Drawbar pull: 155±3 KN
Rated load capacity: 5000 kg
Operating weight: 16800±300 kg
Dumping type: Standard/High dump
Height(during bucket at the maximum lift position): 5275 mm
Height of the lower pin of the boom from the ground: 4119/4520 mm
Dump height-45°dump angle: 3062/3458 mm
Dump reach-45°dump angle: 1276/1230 mm
Bukcet angle-trasport position: 48/46 °
Bukcet angle-off-ground position: 45/42 °
Digging depth: 50 mm
Bucket angle-Max.lift position: 53/50 °
Bucket dump height: 45 °
Transport height: 400 mm
Min.ground clearance: 409 mm
Front axle-hinge dimension of front and rear vehicle frame: 1615 mm
Wheel base: 3230 mm
Overall length: 8015/8230 mm
Max.gradeability: 32 °
Overall height: 3380 mm
Overall width-Bukcet: 3000 mm
Min.turning radius-Bukcet: 7170/7280 mm
Min.turning radius-Outside of tyre: 6537.5 mm
Steering angle(R/L): 35 °
Wheel thread: 2240 mm
Distance of tyre outside: 2835 mm
Manufacturer/model: WD10G220E21
Emission standard: China Ⅱ
Rated power/speed: 162/2200 KW/rpm
Max.torque/speed: 860N·m/1400-1600 N.m/rpm
Number of cylinders/Displacement: 6/9.726 L
Generator: 70 Amp
Battery: 2-24V/120 Ah
Starting motor: 24V/7.5kW V
Gearbox form: Planetary gearbox
Gear shift form: Flexible shaft control gear shift
Gearbox pressure: 1.2-1.5 Mpa
Torque convertor form: Single level,Single turbin，Four elements
Drive axle: Fixed front axle&Swing rear axle
Rear axle Swing angle: ±10°
Main reduction: Sprial bevel gear,One-level reduction
Hub reduction: Planetary transmission reduction
Tyre specification: 23.5-25 L-3 16PR TT
Travel speed-forwards: 13/36
Travel speed-backwards: 16
Travel brake: Clamp disc brake
Air pressure: 0.7-0.78 MPa
Parking brake: Flexible clamp disc brake
Emergency brake: Flexible clamp disc brake
Form: Full hydraulic load sensor steering
Gear pump: 176L/min·2200rpm L/min,prm
System pressure: 15 Mpa
Steering cylinder form: Two-cylinder drive
Steering angle: ±35°
Form: Mechanical flexible shsaft control
Flow: 220L/min.2200prm L/min,prm
Distribution valve: 2-linkage valve
System pressure: 16 Mpa
Sum of the three items: 11 s
Fuel: 285 L
Hydraulic oil: 265/270 (3 pipeline)L
Engine oil: 20 L
Gearbox oil: 46 L
Front bridge/Rear bridge: 28/28 L
China Ⅱ
Lonking gearbox
Flexible shaft control gear shift
Longking dry-type drive axle
Mechanical flexible shaft operation control
Flexible clamp disc manual brake
ROPS&FOPS
Detachable cab
Combination instrument
Fan heater
China Ⅲ
Cold start
Pilot operation control
Pilot operation control
High-dump boom
Oil-bath air filter
Radial tyre
Alarm light
The third linkage piping
Slide window of cab
Reverse image
Cold&Warm aircon
Radio/MP3
Log grapple fork（Single upper,double lower）
Log grapple fork（double upper and lower）
Grass grapple fork
Goods fork
Electric-heating rear window
Lockable oil tank cap
Bucket（With 3 service blades）
Customized bucket by Russian
(2.7m³)Rock bucket
Enlarged bucket(3.5m³)
Coal bucket(4.2m³)
Side-dumping bucket
Marble fork
Quick-hitch device
Normal detachable cab
– Strong power, high reliability, low noise, energy saving, and environmental protection.
– Independent research and development of arc lifting mechanism, simple structure, strong bearing capacity, good reliability
– IS0 pilot operating mode with easy operation, flexible control and good inching performance.
– International universal quick-change device with easy switching of cleaning, miling, snow-blowing, and other accessories.
– Standard bucket floating and automatic leveling function that greatly improves the work efficiency.
– All-around maintenance space that ensures easy access to the parts to be maintained and facilitates maintenance.
