L*W*H
Standard bucket capacity
Digging force
Drawbar pull
Rated load capacity
Operating weight
L*W*H: 8700*3050*3510 mm
Standard bucket capacity: 3.5 m3
Digging force: ≥200 KN
Drawbar pull: 200±5 KN
Rated load capacity: 6000 kg
Operating weight: 21700±300 kg
Dumping type: Standard
Height(during bucket at the maximum lift position): 6129 mm
Height of the lower pin of the boom from the ground. 4709 mm
Dump height-45°dump angle: 3580 mm
Dump reach-45°dump angle: 1227 mm
Bukcet angle-trasport position: 48.6 °
Bukcet angle-off-ground position: 46.2 °
Digging depth: 69 mm
Bucket angle-Max.lift position: 50.4 °
Bucket dump height: 45 °
Transport height: 400 mm
Min.ground clearance: 512 mm
Front axle-hinge dimension of front and rear vehicle frame: 1700 mm
Wheel base: 3400 mm
Overall length: 8700 mm
Max.gradeability: 30 °
Overall height: 3510 mm
Overall width-Bukcet: 3050 mm
Min.turning radius-Bukcet: 7594 mm
Min.turning radius-Outside of tyre: 6500 mm
Steering angle(R/L): 35 °
Wheel thread: 2270 mm
Distance of tyre outside: 2945 mm
Manufacturer/model: WP10G240E341
Emission standard: China Ⅲ
Rated power/speed: 178/2200 KW/rpm
Max.torque/speed: 1200/1400-1600 N.m/rpm
Number of cylinders/Displacement: 6/9.726 L
Generator: 70 Amp
Battery: 2-24V/120 Ah
Starting motor: 24 V
Gearbox form: Planetary box
Gear shift form: Planetary power gear shift
Gearbox pressure: 1.1-1.5 Mpa
Torque convertor form: Single level,Two turbins，Four elements
Drive axle: Dry-type axle
Rear axle Swing angle: ±10°
Main reduction: Sprial bevel gear,One-level reduction
Hub reduction: Planetary transmission reduction
Tyre specification: 26.5-25-24PR TT
Travel speed-forwards: 14/38
Travel speed-backwards: 19.5
Travel brake: Single pipe line four wheel clamp disc brake
Air pressure: 0.7-0.78MPa MPa
Parking brake: Air-controlled clamp disc brake
Emergency brake: Air-controlled clamp disc brake
Form: Full hydraulic load sensor steering
Gear pump: 176/2200 L/min,prm
System pressure: 16 Mpa
Steering cylinder form: Two-cylinder drive
Steering angle: ±35°
Form: Single handle pilot control
Flow: 275L/min.2200prm
Distribution valve: 2-linkage valve
System pressure: 18 Mpa
Sum of the three items: ≤10.8 s
Fuel: 330 L
Hydraulic oil: 270 L
Engine oil: 19 L
Gearbox oil: 63 L
Front bridge/Rear bridge: 62 L
China Ⅲ
Lonking gearbox
Flexible shaft control gear shift
Longking dry-type drive axle
Mechanical flexible shaft operation control
Air-controlled clamp disc brake
ROPS&FOPS
Detachable cab
Combination instrument
Cold&Warm aircon
Cold start
Pilot operation control
Standard boomStandard boom
Oil-bath air filter
Tyre 750/65R25
The third linkage piping
Alarm light
Slide window of cab
Reverse image
Fan heater
Radio/MP3
Log grapple fork（Single upper,double lower）
Log grapple fork（double upper and lower）
Log grapple fork（Single upper,double lower）
Electric-heating rear window
Lockable oil tank cap
Rock bucket
5.6m3Coal bucket
Normal detachable cab
– Strong power, high reliability, low noise, energy saving, and environmental protection.
– Independent research and development of arc lifting mechanism, simple structure, strong bearing capacity, good reliability
– IS0 pilot operating mode with easy operation, flexible control and good inching performance.
– International universal quick-change device with easy switching of cleaning, miling, snow-blowing, and other accessories.
– Standard bucket floating and automatic leveling function that greatly improves the work efficiency.
– All-around maintenance space that ensures easy access to the parts to be maintained and facilitates maintenance.
