L*W*H
Standard bucket capacity
Digging force
Drawbar pull
Rated load capacity
Operating weight
L*W*H: 8886×3300×3460 mm
Standard bucket capacity: 5.2 m3
Digging force: ≥245±3 KN
Drawbar pull: 200±3 KN
Rated load capacity: 7000 kg
Operating weight: 23500±300 kg
Dumping type: Standard
Height(during bucket at the maximum lift position): 6220 mm
Height of the lower pin of the boom from the ground: 4639 mm
Dump height-45°dump angle: 3419 mm
Dump reach-45°dump angle: 1493 mm
Bukcet angle-trasport position: 50.4 °
Bukcet angle-off-ground position: 47.6 °
Digging depth: 157 mm
Bucket angle-Max.lift position: 51.6 °
Bucket dump height: 40 °
Transport height: 400 mm
Min.ground clearance: 421 mm
Front axle-hinge dimension of front and rear vehicle frame: 1775 mm
Wheel base: 3550 mm
Overall length: 8886 mm
Max.gradeability: 30 °
Overall height: 3460 mm
Overall width-Bukcet: 3300 mm
Min.turning radius-Bukcet: 7763 mm
Min.turning radius-Outside of tyre: 6935 mm
Steering angle(R/L): 36 °
Wheel thread: 2350 mm
Distance of tyre outside: 3100 mm
Manufacturer/model: WP10G240E341
Emission standard: China Ⅲ
Rated power/speed: 199/2000 KW/rpm
Max.torque/speed: 1100/1400-1600 N.m/rpm
Number of cylinders/Displacement: 6/9.726 L
Generator: 55 Amp
Battery: 2-24V/120 Ah
Starting motor: 24V/7.5kW
Gearbox form: Fixed shaft full automatic gearbox
Gear shift form: Full automatic electro-proportional gear shift
Gearbox pressure: 1.2-1.5 Mpa
Torque convertor form: Single level,Single turbin，Three elements
Drive axle: Fixed front axle&Swing rear axle
Rear axle Swing angle: ±10°
Main reduction: Sprial bevel gear,One-level reduction
Hub reduction: Planetary reduction
Tyre specification: 750/65R25★★L-3TL
Travel speed-forwards: 6.2/12.2/22.8/36
Travel speed-backwards: 7.5/12.7/22.8
Travel brake: Single pipe line clamp disc four wheel dry type
Air pressure: 0.7-0.78 MPa
Parking brake: Hydraulic brake
Emergency brake: Hydraulic brake
Form: Full hydraulic load sensor steering
Gear pump: 220/2200
System pressure: 16 Mpa
Steering cylinder form: Two-cylinder drive
Steering angle: ±35°
Form: Single handle pilot control
Flow: 275L/min.2200prm
Distribution valve: 2-linkage valve
System pressure: 23 Mpa
Sum of the three items: 10.5 s
Fuel: 350 L
Hydraulic oil: 280 L
Engine oil: 20 L
Gearbox oil: 48 L
Front bridge/Rear bridge: 46/46 L
China Ⅲ
Gearbox
Integral pilot+gear control operation joystick
Hydraulic brake
ROPS&FOPS
Detachable cab
LED work light
Radio/MP3 medium device
LCD instrument
Cold&Warm aircon
Alarm light
Reverse image
Slide window of cab
Rear wiper of cab
Cold start
High-dump boom
Oil-bath air filter
Electric-heating rear window
Lockable oil tank cap
Fan heater
(4.2m³)Rock bucket
(7.0m³)Enlarged coal bucket
– Strong power, high reliability, low noise, energy saving, and environmental protection.
– Independent research and development of arc lifting mechanism, simple structure, strong bearing capacity, good reliability
– IS0 pilot operating mode with easy operation, flexible control and good inching performance.
– International universal quick-change device with easy switching of cleaning, miling, snow-blowing, and other accessories.
– Standard bucket floating and automatic leveling function that greatly improves the work efficiency.
– All-around maintenance space that ensures easy access to the parts to be maintained and facilitates maintenance.
